Tag: real estate investment

Refi Existing Investment Property to Purchase Another?

One of our Facebook fans, Tony Margiotta, posed this question, which I’m happy to try my hand at answering here:

“Could you talk about refinancing an income property in order to purchase a second income property? I’m trying to understand the refinance process and how you can use it to your advantage in order to build a real estate portfolio. Thanks Frank!”

=============================================================

The Good News

Your plan – to extract some of the equity from an investment property you already own and use that cash as down payment to purchase another – is fundamentally sound. In fact, that’s exactly what I did when I started investing back in the ‘70s, so to me at least, it seems like a brilliant idea.

Of course, you need to have enough equity in your current property. How much is enough? That will depend on the Loan-to-Value Ratio required by your lender. The refi loan has to be small enough to satisfy the LTV required on the current property, but big enough to give you sufficient cash to use as the down payment on the new property.

For example, let’s say your bank will loan 70% of the value of your strip shopping center, which is appraised at $1 million. So, you expect to obtain a $700,000 mortgage. Your current loan is $550,000, which would leave you with $150,000 to use as a down payment on another property.

Given the same 70% LTV, $150,000 would be a sufficient down payment for a $500,000 property, i.e. 70% of $500,000 = $350,000 mortgage plus $150,000 cash.

But Wait… Some Issues and Considerations

Unfortunately, it’s not the ’70s or even ’07 anymore, so while the plan is sound, the execution may present a few challenges. Best to be prepared, so here are some issues to consider:

    • In the current lending environment, financing can be hard to find, and the terms may be more restrictive than what you experienced in the past. Notice that I used a 70% LTV in the example above. You might even encounter 60-65% today, while a few years ago it could have been 75-80%.  In order to obtain the loan, you might also have to show a higher Debt Coverage Ratio than you would have in the past – perhaps 1.25 or higher, compared to the 1.20 that was common before.
    • How long have you had the mortgage on the current property?  Some lenders will not let you refinance if the mortgage isn’t “seasoned” for a year or even longer.
    • How long have you owned the property? A track record of stable or growing NOIs over time will support your request for a new loan.  You need to make a clear and effective presentation to the lender showing that the refi makes sense, especially in a tight lending environment.
    • You need to run your numbers and not take anything for granted. For example, will your current property have a cash flow sufficient to cover the increased debt?
    • Keep in mind that you’re adding more debt to the first property, so the return on the new property has to be strong enough to justify the diminution of the return on the first.
    • Have you compared the overall return you would achieve from the two properties using the refi plan as opposed to the return you might get if you brought in some equity partners to help you buy the new property?

In a nutshell, refinancing an existing income property to purchase another is a time-honored and proven technique, but it in a challenging lending environment be certain you do your due diligence and run your numbers with care.

Of course I never miss an opportunity to promote my company’s software, so consider using that not only to analyze the deal and its variations, but also to build the presentations that will optimize your chances of obtaining the financing and/or the equity investors.

Frank Gallinelli

5 Mistakes Every Real Estate Investor Should Avoid

In my nearly 30 years of providing analysis software to real estate investors, and almost a decade of writing books and teaching real estate finance at Columbia University, I’ve had the opportunity to talk with thousands of people who were analyzing potential real estate investments. Some of these people were seasoned professionals, many were beginners or students, but just about all were highly motivated to analyze their deals to gain the maximum advantage.

I’ve seen some tremendous creativity in their analyses, but I’ve also seen some huge missteps. Here are some of the pitfalls you will want to be sure to avoid.


1. The Formula That Doesn’t Compute

If you are attempting any kind of financial analysis, then a full-featured spreadsheet program like Excel is almost certainly your tool of choice. You might opt for professionally built models, like my company’s RealData software, or you could attempt to construct your own.

  • One of the most common problems I see in do-it-yourself models is the basic formula error. A robust financial analysis involves the interaction of many elements, and it is really easy to make any of several errors that are hard to detect. The simplest of these is an incorrect reference.  You entered your purchase price in cell C12 and meant to refer to it in a formula, but you typed C11 in that formula by mistake. You may (or perhaps may not) notice that your evaluation of the property doesn’t look right, but it can be difficult for you to find the source of the problem.
  • You used to have a formula in a particular cell, but you accidentally overwrote that formula by typing a number in its place. The calculation is gone from the current analysis, and if you re-use the model, you’ll always be using that number you typed in, not the calculated value you expect.
  • Cutting and pasting numbers seems innocent enough, but it can scramble your model’s logic by displacing references. Simple rule: Never cut and paste in a spreadsheet.
  • Perhaps the most insidious is the formula that doesn’t do what you thought it did. Let’s say you have three values that you enter in cells A1, B1, and C1. You want to write a formula that adds the first two numbers and divides the result by the third. It’s easy to say this in plain English: “I want A1 plus B1, divided by C1.” So you write the formula as =A1+B1/C1. Wrong. Division and multiplication take precedence, so the division happens first and that result gets added to A1. Not what you expected. The formula that does what you intended would be =(A1+B1)/C1, where the sum of A1 and B1 is treated as a single value, divided by C1.


2. The Modern Art Syndrome

Even if you get all of your formulas correct, your job is only half done. I harangue my grad students constantly with this pearl of wisdom: Sometimes you create a pro forma analysis of a property strictly for your own interest. You will never show it to anyone else. Most of the time, however, successful completion of a real estate investment deal means you have to “sell” your point of view to one or more third parties:

  • You may be the buyer, trying to convince the seller that your offer is reasonable;
  • You may need to convince the lender that the deal should be financed; or
  • You may need to show an equity partner that his or her participation would be profitable.

Most of the homebrew presentations that I see look to me like a Jackson Pollock painting with numbers superimposed. The layout usually has a logic that I can’t discern, and I find myself hunting for the key pieces of information that the presenter should have designed to jump off the page.

The layout needs to be orderly and logical: revenue before expenses and both before debt service.

Labels need to be unambiguous:

  • If you mention capital expenditures, are they actual costs or reserves for replacement?
  • Is the debt service amortized or interest only?
  • When you label a number as “Price,” are you talking about the stated asking price, or your presumed offer? Be clear.

Lenders and experienced equity investors will be looking for several key pieces of information before they scrutinize the entire pro forma, items like Net Operating Income, Debt Coverage Ratio, Cash Flow and Internal Rate of Return.  If these items don’t stand out, or if the presentation is disorganized, you might as well add a cover page that says, “ I’m Just an Amateur Who Probably Can’t Pull This Deal Off.”


3. Errors, We Get Errors, Stack and Stacks of Errors

You may be too young to know Perry Como’s theme song (by the way, it was “letters,” not “errors”), but the tune goes through my head when I look at some investors’ spreadsheets.

  • The #NUM error can appear when you try to perform a mathematically impossible calculation, like division by zero, or also when attempting an IRR calculation that can’t resolve.
  • #VALUE usually occurs when you type something non-numeric (and that can include a blank space, letters, punctuation, etc.) into a numeric data-entry cell. If there are formulas in your model that are trying to perform some kind of math using the contents of that cell, those formulas will fail. In other words, if you try to multiply a number times a plain-text word, you’re violating a law of nature and Excel is going to call down a serious punishment on your head, a sort of high-tech scarlet letter.

It can get really ugly really fast because every calculation that refers to the cell with the first #NUM or #VALUE will also display the error message, so the problem tends to cascade throughout the entire model. Unfortunately, I often see investors who then go right ahead and print out their reports with these errors displayed and deliver the reports to clients or lenders.

Your objective in giving a report to a third party is typically to try to convince the recipient to accept your point of view. You will not accomplish that if your report has uncorrected errors.


4. What’s Wrong with This Picture?

It’s the errors you overlook – the ones that don’t have nice, big, upper-case alerts like #VALUE – that can cause the greatest mischief of all; and these can be troublesome even if the analysis is for your eyes only.

It may be an unwanted and unintended side effect of the computer age that we tend to accept calculated reports at face value. Be honest: How often do you sit at a restaurant with a calculator and verify the addition on your dinner check?

This presumption of accuracy can be dangerous when you are evaluating a big-ticket item like a potential real estate investment. As I discussed earlier, you could have bogus formulas that give you inaccurate results. But even if you use a professionally created tool like RealData’s Real Estate Investment Analysis software, you are still not immune to the classic “garbage in, garbage out” syndrome.

The mistake that I see far too often is a failure to apply common sense. For example:

  • “Gee, this investment looks like it will have a 175% Internal Rate of Return. Looks good to me.”  (Reality: You entered the purchase price as $1,000,000 instead of $10,000,000. You should have been saying to yourself, 175% can’t be right; what did I do wrong?)
  • “Wow, this property shows a terrific cash flow.” (Reality: You entered the mortgage interest rate as 0.07% instead of 7%.) Again, results outside the norm, either much better or much worse than you would reasonably expect, are your tip-off that a mistake is lurking somewhere. It is essential that you develop the habit of examining every financial work-up – those you create, and also those that are presented to you – very closely to see if the calculations appear reasonable.


5. What You Don’t Know CAN Hurt You

The final item in our list of big-time mistakes goes beyond the mechanics of spreadsheets and formulas and into the realm of fundamentals. You can be the most proficient creator of spreadsheet models on the planet, but if you don’t really understand the essential financial concepts that underlie real estate investment analysis, then you will neither be able to create nor interpret an analysis of such property.

The examples that I’ve seen are numerous – I can’t possibly list more than a few here – but they all revolve around the same issue:  A lack of understanding of basic financial concepts as they apply to real estate.  Some of the most important:

  • Net Operating Income – This is a key real estate metric, and calculating it incorrectly can play havoc with your estimation of a property’s value. Basically, NOI is Gross Operating Income less the sum of all operating expenses, but I have frequently seen all kinds of things subtracted when they should not be. These have included mortgage interest or the entire annual debt service, depreciation, loan points, closing costs, capital improvements, reserves for replacement, and leasing commissions. None of these items belongs in the NOI calculation.
  • Cash flow – I have seen NOI incorrectly labeled as “cash flow,” and have seen cash flow miscalculated with depreciation, a non-cash item, subtracted.
  • Capitalization rate – Cap rate is another key real estate metric and is the ratio of NOI to value. Unfortunately, I’ve encountered some folks who have used cash flow instead of NOI when attempting to figure the cap rate and have ended up with a completely erroneous result – not only for the cap rate itself, but then also for the value of the property.

Clearly, there are two vital problems with these kinds of basic errors. First, is that they completely derail any meaningful analysis. If your NOI is not really the correct NOI and your cap rate is not really the correct cap rate, then nothing else about your evaluation of the property can possibly be correct. And second, if you give this misinformation to a well-informed investor or lender, your credibility will evaporate.


The Bottom Line

What is our take-away from these five disasters waiting to happen? You could avoid many of these errors by using the best, professionally developed analysis models – but then, of course, you would expect me to say that because that’s what we do for a living.

Let me suggest three other important steps you can take:

  • Understand that there is no substitute for careful scrutiny of any financial presentation, whether it is someone else’s or your own. Be diligent always and  apply the test of reasonableness.
  • Recognize that any real estate analysis you create is likely to be a representation to a third party of the quality of your thinking and professional competence. You wouldn’t be careless or casual with a resume; you should give the same care to your real estate presentations.
  • Finally, recognize that you need to make a commitment to mastering the fundamental concepts and vocabulary of real estate investing. There is no substitute for knowledge.

####

Want to learn more?

The Flavor of the Month: Apartment Investing

It comes as no surprise to those of us who are a bit long in the tooth: The recent economic environment has been bad for almost everything, but it’s good for multi-family investment property.

When credit flows freely, almost anyone who can buy a house will buy a house. (Whether they can pay for it after the closing is of course another matter.) On the other hand, when credit tightens or dries up almost completely, then the subprime prospects are frozen out of the housing market, along with a sizeable group of perfectly responsible borrowers who now find they can’t clear the considerably elevated qualification standards. It doesn’t take tremendous insight to realize that most of these people are now candidates for apartment space. Remember Econ 101?  Supply, demand, etc.

If you read the financial press (or follow our tweets) then you’ve seen ample evidence lately that apartment properties are hot. The Wall Street Journal  cites a Marcus and Millichap report stating the the values of apartment buildings rose 16% in 2010 after falling 27% between 2006 and 2009. In that same article, WSJ says that the supply of new apartment buildings is at a two-decade low. There’s that supply and demand thing again.

Reuters  recently reported that apartment vacancies showed a steep drop in the first quarter of 2011. At the same time, Investor’s Business Daily noted that even the smallest buildings — those with four units or less — were in high demand. An advantage here for the small investor is that this kind of property can usually qualify for Fannie- or Freddie-backed financing, and perhaps on even more favorable terms if the investors lives in one of the units.

After a long period when it seemed like investors were in duck-and-cover mode, it’s good to see this resurgance of activity.

(self-serving footnote: If you’re doing an apartment deal, be sure to run the numbers first, Either the Express or Professional Edition of Real Estate Investment Analysis will do a great job with apartment buildings. If you’re raising capital from equity partners, then use the Pro Ediiton — it will give you presentations for individual partners.)

MIRR — How It Works

From our experience, it appears that Internal Rate of Return (IRR) is the metric of choice for many, if not most, real estate investors. However, you may be aware that there are a few issues with IRR that can cause you some vexation: If you expect a negative cash flow at some point in the future, then the IRR computation may simply fail to come up with a unique result; and with your positive cash flows, IRR may be a bit too optimistic about the rate at which you can reinvest them.

For these reasons, a variation on IRR, called Modified Internal Rate of Return (MIRR), can be very important. When you see how it works, then you’ll also see that it gives you the opportunity to deal with IRR’s shortcomings.

Our support folks have had a number of calls from users of our Real Estate Investment Analysis software asking for guidance in using and understanding MIRR. How does it work, and how do I choose the “safe” and “reinvestment” rates that it asks for?

Let’s start with some definitions:

safe rate The interest rate obtainable from relatively risk-free investments, such as U.S. Government Treasury Bonds.” source: The Complete Real Estate Encyclopedia by Denise L. Evans, JD & O. William Evans, JD; 2007, McGraw-Hill (btw, this is an excellent reference book)

reinvestment rate When analyzing the value of an income producing property, it is the rate an investor is assumed to be able to earn on intermediate cash flows. …” Ibid

There is an alternative name sometimes used for the safe rate — “finance rate” — and the rather opaque definition given in the Excel help for MIRR doesn’t seem particularly helpful: “…the interest rate you pay on the money used in the cash flows.” Frankly, I’m not sure I understand what that is supposed to mean, but I believe if you focus on the term “safe rate,” you will be able to follow this discussion easily. The reinvestment rate also sports an alias — “risk rate” — which seems clear enough, but I believe again that you will find it easier to stick with the more common term, “reinvestment.”

Let’s begin with the safe rate and pose the question, “Why and when does the safe rate come into play?” The answer has to do with negative cash flows. Usually, you expect an investment to put cash into your pocket (positive cash flow), but sometimes it pulls money out of your pocket instead (negative cash flow). In real life, you can’t leave a negative cash flow sitting there and just move on to the next year. The property has to pay its bills, so you as the investor have to pick up the tab. In other words, you have to make an additional cash investment in the property. Herein lies the key.

Six Rules of Thumb for Every Real Estate Investor

Life can be hard, especially as we try to climb out of the Great Recession. Real estate investing can be a challenge, as well; and while we surely won’t presume to suggest how to deal with life’s big issues, we can offer a few thoughts as to how you might maintain some equilibrium when you look at investment property.

Those of you who follow our content at RealData.com — newslettersbooksFacebook and software — know that we stress maximizing your chances for success through understanding the metrics of investment property. We don’t tell you that you’ll get rich by thinking positive thoughts, raising your self-confidence, and charging fearlessly into the fray. Instead we urge you to learn about the the financial dynamics that are at work in income-producing real estate. Whether you’re scrutinizing a piece of property you already own, one you want to sell, or one you may choose to buy or develop, you need to master the metrics. The numbers always matter.

And so here are our “6 Rules of Thumb for Every Real Estate Investor.”

1. Vacancy

— Let’s begin with a simple one. What percentage of the property’s total potential gross income is being lost to vacancy? Start off by collecting some market data, so you will know what is typical for that type of property in that particular location. Does the property you own or may buy differ very much from the norm? Obviously, much higher vacancy is not good news and you want to find out why. But if vacancy is far less than the market, that may mean the rents are too low. If you’re the owner, this is an issue you need to deal with. If you’re a potential buyer, this may signal an opportunity to acquire the property and then create value through higher rents.

2. Loan-to-Value Ratio (LTV)

— When the financial markets return to some semblance of normalcy, they will probably also return to their traditional standards for underwriting. One of those standards is the Loan-to-Value Ratio. The typical lender is generally willing to finance between 60% – 80% of the lesser of the property’s purchase price or its appraised value. Conventional wisdom has always held that leverage is a good thing — that it is smart to use “Other People’s Money.”

The caution here is to beware of too much of a good thing. The higher the LTV on a particular deal, the riskier the loan is. It doesn’t take much imagination to recognize that in the post-meltdown era, the cost of a loan in terms of interest rate, points, fees, etc. may rise exponentially as the risk increases. Having more equity in the deal may be the best or perhaps the only way to secure reasonable financing. If you don’t have sufficient cash to make a substantial down payment, then consider assembling a group of partners so you can acquire the property with a low LTV and therefore with optimal terms.

3. Debt Coverage Ratio (DCR)

— DCR is the ratio of a property’s Net Operating Income (NOI) to its Annual Debt Service. NOI, as you will recall is your total potential income less vacancy and credit loss and less operating expenses. If your NOI is just enough to pay your mortgage, then your NOI and debt service are equal and so their ratio is 1.00. In real life, no responsible lender is likely to provide financing if it looks like the property will have just barely enough net income to cover its mortgage payments. You should assume that the property you want to finance must show a DCR of at least 1.20, which means your Net Operating Income must be at least 20% more than your debt service. For certain property types or in certain locations, the requirement may be even higher, but it is unlikely ever to be lower.
Not to preach, but planning a budget with a bit of breathing room might be a good principle for every government agency, financial institution and family to follow.

4. Capitalization Rate

— The Capitalization Rate expresses the ratio between a property’s Net Operating Income and its value. Typically it is a market-driven percentage that represents what investors in a given market are achieving on their investment dollar for a particular type of property. In other words, it is the prevailing rate of return in that market. Appraisers use Cap Rates to estimate the value of an income property. If other investors are getting a 10% return, then at what value would a subject property yield a 10% return today?
Remember first that the Cap Rate is a market-driven rate so you need to interrogate some appraisers and commercial brokers to discover what rate is common today in your market for the type of property you’re dealing with. But you also need to recognize that Cap Rates can change with market conditions. In our long and checkered careers we have seen rates go as low as 4-5% (corresponding to very high valuations) and as high as the mid-teens (very low valuations), with historical averages probably bunched closer to 8-10%. If you are investing for the long term, and if the cap rate in your market is presently pushing the top or the bottom of the range, then you need to consider the possibility that the rate won’t stay there forever. Look at some historical data for your market and take that into account when you estimate the cap rate rate that a new buyer may expect ten years down the road.

5. Internal Rate of Return (IRR)

— IRR is the metric of choice for many real estate investors because it takes into account both the timing and the size of cash flows and sale proceeds. It can be a bit difficult to compute, you may want to use software or a financial calculator to make it easy. Once you have your estimated IRR for a given holding period, what should you make of it? No matter how talented you are at choosing and managing property, real estate investing has its risks — and you should expect to earn a return that is commensurate with those risks. There is no magic number for a “good” IRR, but from our years of speaking with investors, we think that few would be happy with anything less than a double-digit IRR, and most would require something in the teens. At the same time, keep in mind the “too good to be true” principle. If you project an astoundingly strong IRR then you need to revisit your underlying data and your assumptions. Are the rents and operating expenses correct? Is the proposed financing possible?

6. Cash Flow

— Cash is King. If you can first project that your property will have a strong positive cash flow, then you can exhale and start to look at the other metrics to see if they suggest satisfactory long-term results.

Negative cash flow means reaching into your own pocket to make up the shortfall. There is no joy in finding that your income property fails to support you, but rather you have to support your property. On the other hand, if you do a have a strong positive cash flow, then you can usually ride out the ups and downs that may occur in any market. An unexpected vacancy or repair is far less likely to push you to the edge of default, and you can sit on the sideline during a market decline, waiting until the time is right to sell.

Overambitious financing tends to be a common cause of weak cash flow. Too much leverage, resulting in greater loan costs and higher debt service can mark the tipping point from a good cash flow to none at all. Revisit LTV and DCR, above.

We’re all thumbs, so to speak, so if you found these rules helpful check out more of our booksarticlessoftware, Facebook page and other resources.

Copyright 2009, RealData® Inc. All Rights Reserved
The information presented in this article represents the opinions of the author and does not necessarily reflect the opinions of RealData® Inc. The material contained in articles that appear on realdata.com is not intended to provide  legal, tax or other professional advice or to substitute for proper professional advice and/or due diligence. We urge you to consult an attorney, CPA or other appropriate professional before taking any action in regard to matters discussed in any article or posting. The posting of any article and of any link back to the author and/or the author’s company does not constitute an endorsement or recommendation of the author’s products or services.
You may not reproduce, distribute, or transmit any of the materials at this site without the express written permission of RealData® Inc. or other copyright holders. The content of web sites displayed or linked from the realdata.com is the copyrighted material of those respective sites.

Real Estate Partnerships and Preferred Return

Q. Can you explain more about how preferred return works in a real estate partnership? Does it always have to go only to the limited partner or non-managing partner?

A. The first point to make about real estate partnerships – whether limited, general or LLC – is that there is certainly no single, pre-defined structure used by all investors. In fact, you may be hard pressed to find two partnership agreements whose provisions are exactly the same.

Not all partnerships include a preferred return but, in those that do, its purpose is to counterbalance the risk associated with investing capital in the deal. Typically, the investor is promised that he or she will get first crack at the partnership’s profit and receive at least a X% return, to the extent that the partnership generates enough cash to pay it. In most partnership structures, the cash flow is allocated first to return the invested capital to all partners. The preferred return is paid next, before the General Partner or Managing Member receives any profit.

There are some variations as to exactly how the preferred return might be set up. If the partnership does not earn enough in a given year to cover the preferred return, the typical arrangement is to carry the shortfall forward and pay it when cash becomes available. If necessary it is carried forward until the property is sold, at which time the partners receive their accumulated preferred return before the rest of the sale proceeds are divided. Again, that assumes that the sale proceeds are in fact sufficient to pay the preferred return. If not, the limited partners have to settle for whatever cash is available.

The return may also be compounded or non-compounded. In other words, if part or all of the amount due in a given year can’t be paid and has to be carried forward, the amount brought forward may or may not earn an additional return (similar to compound vs. simple interest). The usual method is for it to be non-compounded. Hence the unpaid amount carried forward does not earn an additional return, but remains a static amount until paid.

An alternative but less common approach is to wipe the slate clean each year. If there isn’t enough cash to pay the preferred return, then the partnership pays out whatever cash is available and starts over from zero next year.

Real estate partnerships will typically define percentage splits between General (i.e., managing) and Limited (i.e., non-managing) partners for profit and sales proceeds. These splits do not come into play until the obligation to pay the preferred return has been met.

For example, let’s say that a limited partner invests $100,000. She is promised a 5% preferred return (non-compounded), 90% of cash flow after the return of capital and payment of preferred return, and 70% of sale proceeds. In the first five years, the partnership generates just enough cash to return the invested capital to all partners. Hence, all future cash flows represent profit. The partnership has a $16,000 cash flow the sixth year, a $20,000 cash flow the seventh year and also sells the property at the end of the seventh year with total proceeds of sale of $150,000. Here is what happens:

year 6 and 7 distributions to LP

The Limited Partner should receive a preferred return of $5,000 per year (5% of her $100,000 investment). By the end of year 6 she hasn’t received any of this return so she is owed $30,000. In the sixth year the partnership cash flow is only $16,000, so that is all she gets; the balance due is carried forward to year 7. In that year the partnership cash flow of $20,000 is sufficient to pay the $14,000 owed from year 6, the $5,000 from year 7 and still leave enough ($1,000) to split 90/10 with the General Partner. Finally, the property is sold at the end of year 7 with $150,000 proceeds to split 70/30 with the General Partner.

Regarding the question, “To whom does the preferred return go?” it is of course possible to structure a partnership so that it goes either to the General or the Limited partner or to Donald Duck if you think that’s a good plan. The presumed purpose of the preferred return is to encourage non-controlling investors to risk their capital in your project; and that encouragement often takes the form of a conditional promise of a minimum return, the “preferred return.” It seems to me that you would have a difficult time raising money from investors if your underlying message were, “This deal is so shaky that I need full control plus first dibs on the cash flow. If there’s anything left, you can have some.”

Run the numbers, but think beyond them. A good partnership is one where all the parties can enjoy a reasonable expectation of success.

Copyright 2009, RealData® Inc. All Rights Reserved
The information presented in this article represents the opinions of the author and does not necessarily reflect the opinions of RealData® Inc. The material contained in articles that appear on realdata.com is not intended to provide  legal, tax or other professional advice or to substitute for proper professional advice and/or due diligence. We urge you to consult an attorney, CPA or other appropriate professional before taking any action in regard to matters discussed in any article or posting. The posting of any article and of any link back to the author and/or the author’s company does not constitute an endorsement or recommendation of the author’s products or services.
You may not reproduce, distribute, or transmit any of the materials at this site without the express written permission of RealData® Inc. or other copyright holders. The content of web sites displayed or linked from the realdata.com is the copyrighted material of those respective sites.

Making the Case for Your Commercial Refinance, Part 2

In Part 1 of this article, you learned what information you need to assemble to get started with the process of refinancing your commercial property — information about your property’s income, expenses and loan balance, and about the prevailing cap rate in your market. You also learned to use some of that information to estimate the current value of the property, then learned to take that result to determine if the property will likely satisfy the lender’s Loan-to-Value requirement.

You got acquainted with Debt Coverage Ratio and mortgage constants and saw how to combine those to test your property’s income stream to find out if it’s strong enough to support your loan request.

Now you have some idea of what your property is worth and how likely it is to appeal to an equity partner or to satisfy a lender’s underwriting requirements. Your next task is to convey your evaluation to that potential partner or lender. You need to make your case with a professional presentation that is easy to grasp but also provides enough detail to support your evaluation of the property and your request for financing.

Unless you’re a “flipper,” you can expect to be involved with this property for the long haul, more or less. It should come as no surprise, therefore, that a lender or investor will appreciate getting a sense of how you believe this property will perform over time. You’re not going to predict the future with precision, but in most situations you should be able to make some reasonable and realistic “pro forma” projections of future performance. There is no hard-and-fast rule, but I believe your projections should go out five to ten years. With commercial properties that have long-term leases in places, 20 years would not be unthinkable.

As we develop the pro-forma presentation through the rest of this article, we’ll be using the Standard Edition of RealData’s Real Estate Investment Analysis (REIA) software. Those readers who are familiar with the software will also note that I’ve taken a few liberties with the material I display, editing some of the images (for example, removing multiple mortgages) to allow you to keep your focus on just the key elements of this example.

Where to start? You’re dealing with rental property, so a rent roll would be a good place to begin. And let’s assume that “today” is January 1, 2009. List your rental units (or groups of units, if you have a large number) with the current rent amount and your estimate of how those rents will change over time. You’ll recall from the APOD you constructed earlier that you expect the total gross scheduled rent for this property to be $219,600 in the first year. For the sake of making this example worthwhile, assume that the property contains both residential and non-residential units, and therefore the total amount of revenue is divided between the two types.

With residential units — apartments, for example — the process of building your rent roll will be fairly straightforward. The rent for each unit of this type is usually a fixed monthly amount. Residential tenancy agreements are seldom long term, most often a one-year lease or even month-to-month occupancy. It’s reasonable to assume that you will try to increase your overall rents on an annual basis. For the first year, you have the following:

sample residential rents, first year

Demand for your apartments has always been strong, but you decide you want to be conservative in your estimate of how much more you can charge each year so you decide to project that these rents will rise at an annual rate of 3%.

sample residential rents, five years

This is a mixed-use property, which means it contains commercial as well as residential rentals. At street level, below the apartments, you have two retail spaces. The first of these is a hardware store, Nuts & Bolts. This store occupies 1,000 rentable square feet and currently pays $21.60 per square foot per year. Its lease calls for a rent increase to $23.50 in July of 2011 The second tenant is Last National Bank, which occupies 2,800 square feet at $25.00 per foot. This tenant’s rent is scheduled to rise to $28.00 per square foot in September of 2012.

Note how your handling of commercial rentals differs from residential. One difference is that you typically charge rent by the square foot rather than by the unit. In most U.S. markets, the rent is expressed in terms of dollars per square foot per year, although in some it is per square foot per month. A second difference is in the length of the lease. As noted earlier, a residential tenant’s commitment may be as little as month-to-month, and generally is not more than one or two years. Commercial tenants, in order to maintain and operate a business from their space, need the certainty that they can continue to occupy for a reasonable length of time. They also need to be able to plan their future cash flow. Hence a commercial lease will usually run for at least a few years, up to as many as 20 or 30.

With the information you have in hand about these commercial leases, you should be able to project the rent from the two commercial units for next several years.

sample commercial rents

The image above is a screen shot from a data-entry portion of the REIA software. This is one image where I haven’t done any editing, i.e., I haven’t removed line items unrelated to our example. I’ve left it complete so you could see that there are other considerations you might need to take into account when you deal with a commercial lease, such as expenses passed through to tenants, leasing commissions, and improvements to the space made by the landlord on behalf of the tenant. We don’t want this article to morph into a full-scale textbook, so we’ll continue to keep our example relatively simple. However, for more information on these and similar topics, you can view our educational articles at realdata.com or refer to the software user’s guide forReal Estate Investment Analysis.

You now have a forecast of the revenue from both the residential and commercial units, and can consolidate this data to include as part of your presentation to your lender or potential partner.

sample combined income

Recall that when you were estimating the value of the property you used something called an Annual Property Operating Data (APOD) form. That form displayed the total rental revenue, an allowance for vacancy and credit loss, and the likely operating expenses for the current year. To fit the needs of your extended presentation you can expand this form to as many years as you want.

For the purpose of this discussion you’ve been projecting out five years, so you’ll do the same with the APOD. You may want to refine your estimates on an almost item-by-items basis. For example, if property taxes, maintenance and insurance are among your greatest expenses, it makes sense to estimate their rates of growth individually. You probably have some history with these items that you can use for guidance. For some other expenses, such as accounting or trash removal, you may want to apply a general, inflation-based estimate. In this example, property management is one of your biggest costs. You know that it will be billed at $15,740 for the first year, but then as a percentage of collected rent — 7% in this case — for future years, so your estimate will just require that you apply the same rate. If you estimate the future rent reasonably well, then the property management fee will follow.

Let’s say you believe that property taxes will increase at 5% per year, and insurance and maintenance at 4%. For all other expenses, you project a 3% annual increase. Your extended APOD should look something like this:

sample APOD

If you owned this property debt-free, your analysis would be nearly complete. But in fact, your objective here is to build an effective case for refinancing your existing loan, so you really need to demonstrate what kind of cash flow this property will throw off with a new loan in place. You need to take this at least one step further.

Recall from the first section of this article that you estimated the value of the property at $1.45 million, and that you need to refinance your $975,000 loan at 7.75% for 15 years. With that information in hand you can complete the taxable income and cash flow sections of your pro forma.

sample taxable income

sample cash flow

These projections should help you make a strong case for approval of your new loan. With that new loan in place, your debt coverage ratio is more than ample in the first year, and improves each year thereafter. Your cash flow is strong, and it too grows each year. It’s strong enough, in fact, that you could even survive the loss of one of your commercial tenants without plunging into a negative cash flow.

Your Net Operating Income is also going up smartly. Perhaps your lender is concerned that the current prevailing cap rate of 11% will rise to 14% by 2013, possibly reducing the value of the property dangerously close to the amount of the mortgage. Does that look like a genuine cause for anxiety?

Remember your cap rate and LTV formulas for the first part of this article.

Value = Net Operating Income / Capitalization Rate
Value in 2013 = 177,839 / 0.14
Value = 1,270,279

So, if cap rates rise to 14% and your NOI is indeed 177,839, then the property should still have a value of about 1.27 million. This is not good news for you, but does the lender have reason to lose sleep?

What will your loan balance be at the end of 2013? You will have been dutifully paying it down from now until five years hence, so surely you will have made a dent. If you return to the REIA software, you’ll find that it includes amortization schedules for all of your property loans. It also tracks the end-of-year balance for each loan as part of its resale analysis, so let’s look at that:

sample mortgage payoff

You will owe $764,719 at the end of 2013. Your property, if cap rates do rise to 14%, will be worth about $1,270,000. Recall that your lender required a Loan-to-Value Ratio of 75% when you applied for the loan. Will it be time to reach for the antacids?

Loan-to-Value Ratio = Loan Amount / Property’s Appraised Amount
Loan-to-Value Ratio at EOY 2013 = 764,719 / 1,270,000
Loan-to-Value Ratio at EOY 2013 = 60.2%

Your LTV looks even better at EOY 2013 than it did when you originally applied for the loan. It’s time to find a polite way to tell the lender to stop looking for excuses. Your loan request is solid and needs to be approved.

You’ve assembled a good deal of data to support your loan request, but don’t forget that a major part of your objective here is to present it in the most effective way. Start by trying to boil it all down. Simplify and summarize. Think of this part of the process as the real estate equivalent of the “elevator pitch.” Ultimately you’re going to need to provide the loan officer with every detail, but you may not get a chance to tell the whole story unless you can convey the essentials in the time it takes to ride the elevator. You need an executive summary.

sample executive summary

This report gives a very direct one-page summary of basic information about the property and its financial metrics. Your lender can see immediately the amount of the loan you’re looking for, the LTV and Debt Coverage Ratio, the Net Operating Income and the cash flow. This report doesn’t supply the underlying supporting data to justify these numbers — that’s why it’s a summary — but taken at face value it tells the loan officer whether there is any reason to give your request a serious look.

An alternative is a report we call the “Real Estate Business Plan,” and it too looks very different from the rows and columns of numbers usually associated with a pro forma. You might assemble information into a report like this in a situation where you still want to make your initial approach with what is essentially still an overview of the property, but one that provides a bit more detail than the one-page summary. Just as with the Executive Summary, you want to provide enough information to be effective, but not so much that you discourage the recipient from actually reading the document.

We designed this report to focus on property description, sources and uses of funds, financing, cash flows, and rates of return, and to simplify its presentation by displaying only the data that is pertinent to the holding period you specify. So, even though the software can deliver projections of up to 20 years, if you want a report based on a five-year holding period, you get a nice, clean presentation with no extraneous labels or data, as you see in this excerpt:

sample business plan, part 1

 

sample business plan, part 2

 

sample business plan, part 3

 

At the beginning of our discussion of pro formas and presentations, I said that you needed to deliver a package that is easy to grasp but also provides enough detail to support your evaluation of the property and your request for financing. You may have already inferred from the progress of this article that the process of building the presentation runs in a direction that’s essentially opposite from the process of delivery. You need to begin, as we did here, at the most granular level of detail: defining individual unit rents and item-by-item operating expenses, first as they currently exist, then as you project them to grow.

That is why you built your rent roll first, then your extended APOD, then your cash flow projections. Next, you distilled this information into summary formats — the Executive Summary and the Real Estate Business Plan.

You built your case by going from the specific to the general. You’ll typically present your case for financing, however, by going the other way. You start with the Summary or Business Plan type of report, which provides enough information to introduce your request without burying the loan officer in a mountain of tiny numbers. When that loan officer says, “Where did you get these revenue projections?” you’ve got your rent roll. When she says, “How did you come up with this NOI?” you’ve got your APOD. And you can do the same for your cash flow and debt coverage, and resale value and rates of return, and more.

You’ve got it all covered.

Before we conclude this discussion, a brief reality check is in order. The example we just worked through was a happy case study because the property’s income stream justified the financing you sought. All the number crunching in the world, however, won’t transform a troubled investment into a good one. A detailed analysis can, however, still be helpful because it can show you what level of revenue you need to reach, or what level of cost-cutting you have to achieve to bring the property into positive cash flow territory and get it back on its feet. But whatever you do, don’t try to “enhance” the numbers to make the property look good. You’re not going to fool the lender and there’s not much point in fooling yourself.

So, what did you learn in Part 2 of this article? You learned to build a rent roll, one style for residential units and another for commercial. You learned to develop pro forma projections by extending your current-year estimates of revenue, operating expenses, and cash flows into the future. Perhaps most important, you learned about creating presentations out of those pro forma projections — presentations that are readable and effective, and that can help you make you case for financing your investment property.

Copyright 2009, RealData® Inc. All Rights Reserved
The information presented in this article represents the opinions of the author and does not necessarily reflect the opinions of RealData® Inc. The material contained in articles that appear on realdata.com is not intended to provide  legal, tax or other professional advice or to substitute for proper professional advice and/or due diligence. We urge you to consult an attorney, CPA or other appropriate professional before taking any action in regard to matters discussed in any article or posting. The posting of any article and of any link back to the author and/or the author’s company does not constitute an endorsement or recommendation of the author’s products or services.
You may not reproduce, distribute, or transmit any of the materials at this site without the express written permission of RealData® Inc. or other copyright holders. The content of web sites displayed or linked from the realdata.com is the copyrighted material of those respective sites.

Making the Case for Your Commercial Refinance, Part 1

Since we released the original version of our Real Estate Investment Analysis software in 1982, our focus has been on pro forma financial analysis of real estate investments and of development properties – projecting the numbers out over time to help users gain a sense of what kind of investment performance they might expect from a particular property or project.

And for lo, these many years, our customers (and from time to time, we ourselves) have used the software to help make decisions as to whether or not to buy a property, and at what price and on what terms. Customers have used it to model how things might play out in the worst case, or in the best case, or somewhere in between. They have used it also to compare alternative investment opportunities.

This type of decision-making process has by far been the most common use of our software. More and more, however, we’ve seen an increased use of these pro formas for the purpose of making presentations to potential equity partners and to lenders.

Which brings us at last to the point of this article. When the economy is blazing away at warp speed, everything is – or at least seems – a bit easier. Forecasts are easier to meet, and partners and lenders are easier to find. But sometimes the economy is not so good, and presents us with new challenges. At this writing, we find ourselves in the middle of a bad case of credit lockjaw. Nothing lasts forever (which in this instance is a good thing), so eventually our credit markets and overall economy will rediscover their equilibrium.

This is all fine, unless you’re holding a property today with a mortgage that will balloon in the near future. In that case, you need to find a new loan, and you’re probably going to have to work for it. That means doing some homework, understanding the process, and building the most compelling case you can for approval of that new loan.

If you were trying to refinance your home, you would be dealing with recent sales of comparable houses, your personal income and debt, and your credit score. With the possible exception of working to get your credit report in order, there’s not a great deal you would do personally to build a case for your re-fi. With an income property, however, a carefully prepared presentation can go a long way in helping you convince a lender – or even a new equity partner – that you have a viable investment.

Re-enter your friend, the pro forma analysis. You may have thought he was on vacation until sales of real estate revived, but in fact he’s as busy as ever with financing and partnerships. If the numbers do indeed work for a property whose balloon is coming due – and sorry, don’t expect to transform a bad investment into a good one with just a pile of color charts – then a detailed pro forma may be that property’s best friend.

Don’t even think about starting that pro forma until you’ve done a bit of legwork and preparation. First you’re going to need some information that is external to the property itself. You need to know the prevailing market capitalization rate for properties of the same type as yours (i.e., office, retail, apartment, industrial, etc.) and in the same market. This information will be critical to estimating the current value of the property. Perhaps the best place to seek this information is from a local commercial appraiser. The bank will certainly use an appraiser, and the appraiser will certainly use a cap rate, so don’t get left out of the party. For the sake of the example we’re going to construct here, say that the commercial appraiser tells you the prevailing cap rate for properties like yours in your market is 11%.

Next you need to learn about underwriting criteria from your potential lenders. Specifically, you need to know the probable interest rate and term of the new loan; the lender’s maximum Loan-to-Value Ratio; and the lender’s minimum required Debt Coverage Ratio. Don’t assume that these criteria will be identical across all lenders or across all property types. In fact, they probably will not. It should not surprise you that different lenders quote different interest rates, but you must also recognize that the same lender may be willing to lend 80% of the value of an apartment complex, but only 65% of the value of a shopping center. Know the lender’s terms before you ask for the loan.

For the purpose of this example, let’s say you’ve called your current lender and found that their maximum Loan-to-Value Ratio for a property like yours is 75%. They require a Debt Coverage Ratio of at least 1.20, and if all looks good, they will loan at 7.75% for 15 years.

We’ll discuss these criteria in detail in a moment, but for now let’s stay focused on collecting information, this time about the property itself. You need to assemble the amount of actual current rent income from each unit and identify the market rent of currently vacant units. You need to make realistic estimates of rental income for the next several years, taking into account the terms of leases now in place. You must figure your current year’s operating expenses, keeping in mind that certain expenditures such as debt payments, capital improvements and commissions should not be included. Nor should you include depreciation or amortization of loan points, which are deductions but not operating expenses. Once again, you have to make some realistic estimates as to how these expenses may change over the next several years. Finally, of course, you have to learn the balance of your current mortgage, so you’ll know how much of a re-fi you require.

Let’s return now to the underwriting criteria you identified, and start with the Loan-to-Value Ratio (LTV):

Loan-to-Value Ratio = Loan Amount / Lesser of Property’s Appraised Amount or Actual Selling Price

If this is a re-fi, then there is no “selling price,” so the value here will be the amount for which the property is appraised. If your financial institution has not taken leave of its senses (in general, if it has not appeared in the headlines or before a Congressional subcommittee in the last six months), then it should be reluctant to loan you or anyone else 100% of the value of a property. They expect you to have some skin in the game, and the question is merely how much.

The lender will quote you their maximum LTV, and before you get anywhere near an application form, you are going to perform your own calculation with your particular property. How much of a loan do you need to replace the existing financing, and how does that relate to the current value of the property?

It should be clear enough that the lower your actual LTV, the more likely you are to secure the loan. The lower the LTV, the more you, the borrower have to lose and the less likely you are to walk away. A low LTV may even earn you more favorable terms. You know how much of a loan you need, so to determine the LTV of your proposed loan, you must estimate the value of the property. Find that value with the same method the lender’s appraiser is likely to use: by applying a capitalization rate to the Net Operating Income (NOI). You already called around to find the prevailing market cap rate, so now you need to calculate the NOI. The most direct way to do this is with the venerable APOD form, where you list your annual income and expenses:

sample APOD for commercial refinance

The total of your scheduled rent income for this year should be $219,600, but because of vacancy and credit losses you will actually collect $210,816. Your various operating expenses total $51,050, leaving you a Net Operating Income of $159,766.

Remember that an appraiser told you the prevailing cap rate for this type of property in your market area is 11%. You have what you need to estimate the value of the property:

Value = Net Operating Income / Capitalization Rate
Value = 159,766 / 0.11
Value = 1,452,418

Round that off to $1.45 million.

You’re ready now to perform your first underwriting calculation. Recall that your lender’s maximum Loan-to-Value Ratio is 75%. Your current loan – the one that is about to balloon – has a balance of $975,000.

Loan-to-Value Ratio = Loan Amount / Lesser of Property’s Appraised Amount or Actual Selling Price
Loan-to-Value Ratio = 975,000 / 1,450,000
Loan-to-Value Ratio = 67.2%

Assuming the lender’s appraiser agrees with your estimate of value, you’ve cleared your first hurdle. Being a cautious individual, however, you want to know your worst-case scenario. What is the lowest appraisal that would still allow your $975,000 re-fi to meet the lender’s LTV requirement? Simply transpose the formula to solve for a different variable:

Property’s Appraised Amount = Loan Amount / Loan-to-Value Ratio
Property’s Appraised Amount = 975,000 / 0.75
Property’s Appraised Amount = 1,300.000

Any appraisal over $1.3 million will be good enough to satisfy the 75% Loan-to-Value requirement.

You will want to build a pro forma that goes out a least five years, so you can demonstrate to the lender that your anticipated cash flow and debt coverage are solid and likely to stay that way. Before you do so, however, there is a formula you can use that will give you a quick estimate of the maximum loan amount that the property’s current income can support. Remember that the strength of an income property lies in the strength of its income stream. This is how the lender will look at your proposal, so it’s what you need to do as well. Here is the formula:

Maximum Loan Amount = Net Operating Income / Minimum Debt Coverage Ratio / (Monthly Mortgage Constant x 12)

You know that your Net Operating Income is $159,766, and the lender has told you the Minimum Debt Coverage Ratio is 1.20. But what’s this Monthly Mortgage Constant?

A mortgage constant is the periodic payment amount on a loan of $1 at a particular interest rate and term. If you know the constant for a loan of $1, you can multiply it by the actual number of dollars of the loan to find the payment amount.

Readers of my books have access to a web site with a variety of tools, including a table of mortgage constants. You can also calculate the Mortgage Constant using this formula in Microsoft Excel:

=PMT(Periodic Rate, Number of Periods, -1)

In the Excel formula, the amount of the loan must be entered as a negative number. In the case of a mortgage constant, we want to use a loan of $1, hence the -1. In the case of a loan at 7.75% for 15 years, the formula would look like this:

=PMT(0.0775/12, 180, -1) = 0.00941276

Since this loan is going to be paid monthly, you express both the rate and the number of periods as monthly amount. Format your answer to display at least eight decimal places.

Now you have all the elements to plug into the formula for maximum loan amount: the Net Operating Income, the minimum Debt Coverage Ratio, and the Mortgage Constant.

Maximum Loan Amount = Net Operating Income / Minimum Debt Coverage Ratio / (Monthly Mortgage Constant x 12)
Maximum Loan Amount = 159,766 / 1.20/ (0.00941276 x 12) Maximum Loan Amount = 133,138.33 / (0.00941276 x 12)
Maximum Loan Amount = 133,138.33 / 0.11295312 Maximum Loan Amount = 1,178,704

Keep in mind that rounding could alter your answer by a few dollars.

(An aside: If you’re the sort of person who does not like to play with long formulas, or who tends to tap calculator keys with a closed fist, we have a solution for you. The RealData Real Estate Calculator – Deluxe Edition, will do all of these underwriting calculations for you, as well as perform a host of other useful real estate functions, including amortization schedules for loans with a variety of terms. There are sixteen modules in the Calculator. Find more info at http://realdata.com/p/calculator.)

Your lender will surely round this result, probably down to something like $1.175 million. But you’re looking for just $975,000, so it appears that your income stream will support this loan request. You will want to verify this by calculating the property’s Debt Coverage Ratio going out five or more years. You’ll do that as part of your property pro forma, in the next installment of this article.

Up to this point, however, you’ve accomplished quite a bit: You learned what information you need to assemble about your lender’s underwriting process, about your property’s income, expenses and loan balance, and about the prevailing cap rate in your market. You’ve learned to use some of that information to estimate the current value of the property, then taken that result to determine if the property will likely satisfy the lender’s Loan-to-Value requirement.

You’ve learned about another underwriting metric, Debt Coverage Ratio, and about mortgage constants. You’ve seen how to combine those to test your property’s income stream to see if it’s strong enough to support your loan request.

Not bad for an hour or two of work.

Next time you’ll see how to assemble this information and more into the kind of professional presentation you can give to a potential lender or equity partner.

Copyright 2009, RealData® Inc. All Rights Reserved

The information presented in this article represents the opinions of the author and does not necessarily reflect the opinions of RealData® Inc. The material contained in articles that appear on realdata.com is not intended to provide  legal, tax or other professional advice or to substitute for proper professional advice and/or due diligence. We urge you to consult an attorney, CPA or other appropriate professional before taking any action in regard to matters discussed in any article or posting. The posting of any article and of any link back to the author and/or the author’s company does not constitute an endorsement or recommendation of the author’s products or services.
You may not reproduce, distribute, or transmit any of the materials at this site without the express written permission of RealData® Inc. or other copyright holders. The content of web sites displayed or linked from the realdata.com is the copyrighted material of those respective sites.

NPV, PI, IRR, FMRR, MIRR, CpA – Stirring the Alphabet Soup of Real Estate Investing, Part 1

NPV, PI, IRR, FMRR, MIRR, CpA–It may seem like a witch’s brew of random letters, but truly, it’s just real estate investing. You can handle it. Any or all of these measures can be useful to you, if you understand what they mean and when to use them.

NPV – Net Present Value

NPV, or Net Present Value, is connected to what all good real estate investors and appraisers do, namely discounted cash flow analysis (aka DCF, if you’d like some more initials).

Discounted Cash Flow is a pretty straightforward undertaking. You project the cash flows that you think your investment property will achieve over the next 5, 10, even 20 years. Then you pause to remind yourself that money received in the future is less valuable than money received in the present. So, you discount each of those future cash flows by a rate equal to the “opportunity cost” of your capital investment. The opportunity cost is the rate you might have earned on your money if you didn’t spend it to buy this particular property.

Consider this example, where you invest $300,000 in cash to earn the
following cash flows:

Year 1 Cash Flow:
10,000
Year 2 Cash Flow:
20,000
Year 3 Cash Flow:
25,000
Year 4 Cash Flow:
30,000
Year 5 Cash Flow:
385,000
(includes the proceeds of sale)

If you discount each of these cash flows at 10%, then add up their discounted values, you’ll get 303,948:

Year 1, Discounted:
9,091
Year 1, Discounted:
16,529
Year 1, Discounted:
18,783
Year 1, Discounted:
20,490
Year 1, Discounted:
239,055
Total PV of Cash Flows:
303,948

Now you have the Present Value of all the future cash flows. However, you also had a cash flow when you initially purchased the property (call that Day 1 or Year 0) – a cash outflow of $300,000, your initial investment. To get the Net Present Value, you find the difference between the discounted value of the future cash flows (303,948) and what you paid to get those cash flows (300,000).

NPV = PV of future Cash Flows less Initial Investment
NPV = 303,948 – 300,000 = 3,948

What does that mean to you as an investor? If the NPV is positive, it suggests that the investment may be a good one. That’s because a positive NPV means the property’s rate of return is greater than the rate you identified as your opportunity cost. The more positive it is in relation to the initial investment, the more inclined you’ll be to look favorably on this investment. Your result here is not stellar, but it is at least positive.

If the NPV is negative, the property returns at a rate that is less than your opportunity cost, so you should probably reject this investment and put your money elsewhere.

That’s all fine, to the extent that you’re confident about that discount rate, your opportunity rate. You estimated 10% in the example above. What if you adjust that estimate by one-half of one percent either way?

NPV @ 9.5%
= 10,284
NPV @ 10.0%
= 3,948
NPV @ 10.5%
= (2,244)

How about one full percent?

NPV @ 9.0%
= 16,789
NPV @ 10.0%
= 3,948
NPV @ 11.0%
= (8,238)

Clearly, the NPV here is very sensitive to changes in the discount rate. If you revise your thinking just slightly about the appropriate discount rate, then the conclusion you draw may likewise need to be revised. As little as a half-point difference could change your attitude from luke-warm to hot or cold. The prudent investor will test a range of reasonable discount rates to get a sense of the range of possible results.

While we’re beating up on NPV, let’s also note that it doesn’t do you much good if your goal is to compare alternative investments. To have some kind of meaningful comparison, you need at least to keep the holding period for both properties the same. But what if one property requires that $300,000 cash investment, but the alternative investment requires $400,000?

PI – Profitability Index

Fortunately, NPV has a cousin that can help you with that problem: Profitability Index. While the NPV is the difference between the Present Value of future cash flows and the amount you invested to acquire them, Profitability Index is the ratio. It doesn’t tell you the number of dollars; it tells you how big the return is in proportion to the size of the  investment.

So where the NPV in the example above was equal to 303,948 minus 300,000, the Profitability Index looks like this:

PI = 303,948 / 300,000 = 1.013

If, quite improbably, you expected exactly the same cash flows from the property that required a 400,000 investment, you would expect your Profitability Index to be much worse, and it is.

PI = 303,948 /400,000: = 0.760

A Profitability Index of exactly 1.00 means the same as an NPV of zero. You’re looking at two identical amounts, in one case divided by each other so they give a result of 1.00 and in the other case subtracted one from the other, equaling zero.

An Index greater than 1.00 is a good thing, the investment is expected to be profitable; an Index less than 1.00 is a loser. When you compare two investments, you expect the one with the greater Index to show the greater profit.

There is a good deal more stirring about in our alphabet soup, so join us for the next installment when we look at IRR – Internal Rate of Return.

—Frank Gallinelli

####

Your time and your investment capital are too valuable to risk on a do-it-yourself investment spreadsheet. For more than 30 years, RealData has provided the best and most reliable real estate investment software to help you make intelligent investment decisions and to create presentations you can confidently show to lenders, clients, and equity partners. Learn more at www.realdata.com.

Copyright 2008, 2014,  Frank Gallinelli and RealData® Inc. All Rights Reserved

The information presented in this article represents the opinions of the author and does not necessarily reflect the opinions of RealData® Inc. The material contained in articles that appear on realdata.com is not intended to provide legal, tax or other professional advice or to substitute for proper professional advice and/or due diligence. We urge you to consult an attorney, CPA or other appropriate professional before taking any action in regard to matters discussed in any article or posting. The posting of any article and of any link back to the author and/or the author’s company does not constitute an endorsement or recommendation of the author’s products or services.